2014 S Workshop Topics

1st Workshop ADE Energy - Stuttgart, 27th of May 2014

• Host: Hochschule für Technik - Stuttgart
• Participant list >> File:Participant list.pdf

Morning Presentations

Presenters (Organisation)	Presentations
Prof. Dr. Coors (HFT - geoinformatics)	CityGML and its existing building model >> File:Coors Energy ADE Intro.pdf
R. Nouvel (HFT - energy)	Review of urban energy simulation models and their data requirements >> File:Nouvel Urban Energy Simulation.pdf
Dr. Perez (former EPFL)	Issues and challenges specific to urban energy models >> File:Diane Perez CityGML workshop Stuttgart.pdf
K.-H. Haefele (KIT)	IFC and gbXML, 2 Building information models for building performance simulation >> File:Haefele IFC-gbXML-V2.pdf

Afternoon Discussion

First proposals Energy ADE

Draft Energy ADE of TU München >> File:EnergyADE TU-Muenchen.pdf Main features of this ADE Energy This Energy ADE is "ENEV-conform" (ENEV = German thermal regulation). The present scope is only the calculation of space heating and cooling demand Modelling decision: The thermal hull is modelled separately from the existing boundary surfaces of CityGML, so as to be fully independant of the CityGML LOD and be able to modell complex thermal hull (attic storey and cellar partly heated etc.) The data modell follows fully the required inputs from the ENEV algorithm (8 facade surface area for the orientations N, NE, E, SE etc...). Remarks of the audience: Why don't you keep the full information concerning the boundary surface orientations? Why should the ADE Energy be restricted to this German regulation?

Draft Energy ADE of project SimStadt >> File:EnergyADE SimStadt.pdf Main features of this ADE Energy This Energy ADE is designed first for steady state simulation (yearly, monthly balance) but may be extended for dynamical simulation (hourly time step). The present scope is only the calculation of space heating / cooling and domestic hot water demand Modelling decision: The thermal shell/hull is integrated into the existing boundary surfaces of CityGML, with the introduction of new thermal parameters (thermalBoundarySurfaceAboveGround, thermalBoundarySurfaceUnderGround, sharedSurfaceArea etc.). The new object "BuildingUnit" is introduced as reference simulation object. it can be either CityGML Building, or CityGML BuildingPart, or possibly CityGML Room in the case of LOD4. The ADE Energy is connected to building libraries (construction, windows, usage etc...). Remarks of the audience: Where do you store your simulation results or measured consumption data? Answer: in the EnergyUse class. How does it work with the CityGML LOD1 which has no BoundarySurface? Answer: New Boundary Surface objects are created.

Open discussion

What is the scope of the ADE Energy? calculation of all building energy demands (with physical and statistical models), energy generation and energy supply. Modelling of Building Physics, HVAC Systems inside the building (geometrical information not necessary), HVAC controls and set-points, Building usage and occupants (maybe later outsourced into a Building Occupant ADE). should allow a plurality of building simulation models adapted to city scale (steady state energy balance, simplified dynamical simulation etc.) The ADE Energy of CityGML should be a BIM like IFC, but in comparison to the latter format, it should tackle city scale energy issues, considering not only the buildings but also energy infrastructure, urban forms, streets, vegetations and other urban objects.

Modelling of Energy infrastructure (District Heating System etc.)? For the modelling of urban energy network, it exists already data modell (specific data model of network simulation softwares and the ADE Utility network, which could be soon integrated into the CityGML 3.0). Then, no urban energy infrastructure modelling is necessary into the ADE Energy (which focus on Building energy). For the connection between the ADE Energy and the network modell, connection points (network substations and heat exchangers) are necessary to link the buildings with specified networks.

Which parameters should we store for the HVAC systems in CityGML, so as to match the different data requirements of the different HVAC models? List of standard parameters (nominal power, efficiency, seasonal efficiency etc.) + generic parameters specific to the different models.

Should we import/convert/store everything into CityGML? No common answer for the moment. Should be tested.

Working groups

Group Building Physics and Materials : K-H Häfele, R. Kaden, M. Lauster, S. Mohamed, R. Nouvel Synchronised with development of CityGML 3.0 on Materials. Group HVAC systems and urban energy infrastructure : R. Nouvel, E. Duminil, D. Monien, M. Lauster, D. Perez Group Building Occupant : R. Nouvel, E. Munoz, J-M Bahu See also projects "extra-Energy" around. May lead to a "Building occupant ADE". Group Metadata and scenarios : D. Perez, R. Nouvel